867/4 IP TORX PLUS® bits, 9 IP x 50 mm Joker The 10 Teeth per inch

The 10 Teeth per inch blade should be used on material 1/4-inch through 3/8-inch thick

Tie rod/Pitman arm adjusting set | Consists of one Pitman arm and four tie rod tools | Included in a blow-molded storage case | Set is included in a blow molded caseThe OTC 6275 is a tie rod/Pitman arm adjusting set

This bit works in quick change impact drivers and because it has a quick change shank

32338 SWITCH

The built-in regulator matches the speed to the job

867/4 IP TORX PLUS® bits, 9 IP x 50 mm Joker The 10 Teeth per inchHigh quality bits for recessed TORX PLUS screws. TORX PLUS profile: in comparison to normal TORX profiles, the enlargement of the 6 torque transferring flanks between the tool and the screw is effected by means of an ellipse shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. Tough